Advertisement

Quick Links

PA10
ANSI
Lumens
User Manual
Anti-roll Ring
CREE XM-L LED
Aero Grade Aluminum Alloy
Reverse Polarity Protection
Tactical Forward
Clicky
HA III Military Grade Hard Anodized

Advertisement

Table of Contents
loading

Summary of Contents for JetBeam PA10

  • Page 1 PA10 ANSI Lumens User Manual Anti-roll Ring CREE XM-L LED Aero Grade Aluminum Alloy Reverse Polarity Protection Tactical Forward Clicky HA III Military Grade Hard Anodized...
  • Page 2: Specifications

    Thanks for choosing JETBeam Flashlight. Please Anti-roll design read the user manual carefully before using your Newly designed high efficiency broad voltage light. drive circuit Reverse polarity protection Equips removable stainless steel tactical clip Features Lightweight design, weighing only 65g...
  • Page 3 Material: Aero grade aluminum alloy 14500 Li-ion Battery AA Battery AA Battery AA Battery AA Battery TURBO HIGH LOWER LOW Finish: HA III Military grade hard anodized LUMENS LUMENS LUMENS LUMENS LUMENS Battery: 1xAA/14500 Li-ion rechargeable battery Switch: Forward clicky 134m (Beam Distance in 14500 Li-ion Battery) Waterproof: IPX-8 standard waterproof...
  • Page 4 1. Insert batteries with the positive (+) end pointing to the head. The PA10 will not work when incorrectly insert the batteries. 2. The PA10 might not be selected functions in User-defined mode when using one 14500 Li-ion rechargeable battery.
  • Page 5: On/Off Switching

    4. Although the PA10 is compatible with a single 14500 Li-ion tighten the head. rechargeable battery, output current is markedly higher (over 2 amps) when used in this mode. Caution must be Alternatively, loosen the head to access User- exercised and only high performance Li-ion rechargeable defined mode.
  • Page 6: Maintenance

    User-defined mode with a clean cloth followed by a thin coating of silicon-based lubricant. Slightly loosening the flashlight head, the PA10 NOTE: DO NOT use petroleum-based lubricants as they may access User-defined mode. In this mode, lightly damage the O-rings and void the product warranty.
  • Page 7 The warranty is nullified in any of the following situations: 1. T h e p r o d u c t ( s ) i s / a r e b r o k e n d o w n , re c o n s t r u c te d a n d / o r m o d i fi e d u n d e r unauthorized conditions.
  • Page 8 www.JET-Beam.com...

Table of Contents