Connectors Pin-Out - IDT Honeycomb User Manual

IDT LED Lights

1.4. Connectors Pin-Out

Control connector
PIN Number
The control connector is designed to connect the LED lights to one of IDT Galileo™ devices.
The +12 V pin provides power to the device and the device provides the correct square wave
signal to the light system via the signal pin.
An external signal source that generates 3.3 V signals can be connected to the control
connector and replace the Sync In connector.
4 pins power connector (7 and 19 LED systems)
PIN Number
Users Manual
1
2
3
4
1
2
3
4
Value
Signal
+ 12 V
GND
GND
Value
+ 36 V
GND
GND
+ 36 V
7