Creative Blaster User Manual page 10

Notes:
If you are playing games in Windows 95/98 MS-DOS mode (that is, pure DOS mode), you
must:
• Connect the CD In connector to the Analog Audio jack of the PC-DVD or CD-ROM drive.
• Unmute the CD Audio device in the Play Control view of SB Live! Mixer.
If you connect to the Digital Audio and Analog Audio jacks of the same PC-DVD or CD-ROM
drive, make sure that in the Play Control view of SB Live! Mixer only the CD Audio or CD
Digital device is unmuted but not both.
If you get distorted or no audio at all, it is because your PC-DVD and CD-ROM drives do not
fully comply to SPDIF specifications. In such cases, make sure that you:
• Connect the CD In connector to the Analog Audio jack of the PC-DVD or CD-ROM drive.
• Unmute the CD Audio device in the Play Control view of SB Live! Mixer.
Cassette and CD player,
Line-out
Synthesizer, etc.
Microphone
For details, see the Speaker Configuration
Guide leaflet.
CD-ROM drive
MPC-to-MPC
(4-pin) audio cable
GamePad
Figure 1-3: Connecting other devices
PC-DVD drive
MPC-to-MPC (2-pin) audio cable
Line In
Mic In
CD Audio
connector
Line Out
Rear Out
Joystick/MIDI
SB Live! Value card
Knowing and Installing Your Cards 1-3
CD SPDIF
connector