Table of Contents
Advertisement
Planet II
-v
3
1. Connect the power supply from the wall socket to your DC IN port.
2. Turn on by pressing ON.
3. Connect the HDMI cable from the unit to your TV (see illustration above).
4. Check if your TV is on the right channel, normally there is diagram to guide you (AV1,
AV2, EXT1, EXT2...).
5. "HDMI SWITCH" application will be launched automatically, select the resolution by
pressing it.
HOW TO USE YOUR TABLET
TURN ON/OFF
Press the POWER button for 3 seconds. To turn off select " turn off the MID".
ENABLE/DISABLE LCD
Once it is turned on, short press POWER to turn off the LCD screen, and you will save
energy. To turn on the LCD screen, press POWER again.
Note: The screen is locked when the screen is off; to unlock the screen, pull the lock icon
from bottom to up.
OPERATION OF THE TOUCH SCREEN
There are three ways to operate the screen of your tablet:
1. Touch any icon on the screen to launch the application.
2. Hold: touch any icon on the home screen and hold. For example, touch an icon on the
home screen and hold, an X will appear in the center screen; drag the selected icon to the
X to remove the icon from the home screen.
3. Drag: Drag your finger from left to right or vice versa to scroll the screen.
HOME PAGE
Once it is turned on, the following screen will be displayed on your tablet.
Advertisement
Table of Contents
