Checking The Oven Burners - GE JGSP28 Installation Instructions Manual

Hide thumbs Also See for JGSP28:
Table of Contents

Advertisement

nstaJiation
nstructions
INSTALL THE RANGE
(CONT.)
[]
BAKE AND BROIL BURNERS
If the bake and/or
broil
burners
have
lifting
or
"lazy"
(floating)
flames
or you have a yellow
flame,
perform
the following
procedures:
[]
CHECKING
THE OVEN BURNERS
To check the bake burner
flames
with the
oven door in the closed position:
1. Open the door and remove
it.
2. Remove
the oven
racks.
3. Remove
the oven
bottom.
Lift the oven
bottom
up at rear and pull
forward.
4. Remove
the four
screws
holding
the
burner
baffle
(flame
spreader)
to the burner
box.
5. Install
and close the oven
door.
6. Turn
on the bake burner.
As you watch
the flames,
check the
following:
• Burner
flames
should
not flutter
or blow
away from
the
burner.
• They
should
be blue in color
with
no trace
of yellow.
The broil
burner
flames
may be seen without
removing
the racks,
oven
bottom
or bake
baffles.
14
[]
ADJUST
THE AIR SHUTTER
BAKE BURNER
1. Remove the orifice fitting
cover.
2. Use a screwdriver
to loosen
the air shutter
screw.
3. Adjust
the air shutter
to 11/32".
4. Retighten
the air shutter
screw.
Orifice
fitting
Air
shutter
shutter
=screw
jj
WHAT
ADJUSTMENT
TO MAKE:
a. If the flames
are yellow,
open the air
shutter
more than
the original
setting.
b. lf the flames
blow
away
or fluttered
from
the burner,
close the air shutter
more than
the original
setting.
Burners
should
be checked
frequently.
BROIL BURNER
1. The broil
burner
is located
and accessible
in the top rear of the oven.
2. Using
a
screwdriver,
loosen
the air
shutter
adjustment
screw.
3. Make
the air
shutter
adjustment.
4. Retighten
the air
shutter
screw.
5. Check
the inner
cone of the flame.
It should
be
between
1/2" and
3/4" long for the
oven
bake
and
broil
burners.
Dim.
"A"
Air shutter
adjustment
screw
Inner
cone
of
flame
1/2" to 3/4"
i_"
Oven
broiler,
WHEN
ALL ADJUSTMENTS
ARE MADE
AND
THE RESULTS
ARE SATISFACTORY
1. Replace the orifice fitting
cover.
2. Replace
the burner
baffle
(flame
spreader)
and screws.
3. Replace
the oven
bottom.
4. Replace
the oven
door.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents