Advertisement
Installation
Instructions
ITI REMOVE THE REFRIGERATOR
DOOR (cont.)
r_
Remove the tape and tilt the door away from
the cabinet.
Lift the door off the center hinge
pin. Ensure that the plastic hinge pin thimble
remains on the hinge pin or inside door hinge
pin hole located in the bottom
of the door.
r_
set the door on a non-scratching
surface with
the inside up.
r_l REMOVE CENTER HINGE
(For models without freezer door)
Remove the hinge pin from the hinge bracket.
The hinge pin will be used again with the new
hinge bracket for the other side.
r_l REMOVE
THE FREEZER DOOR
(For models with freezer door)
_1
Tape the door shut with masking tape.
FB1 Remove hinge pin from hinge bracket. This will
be used again with the new hinge bracket for
the other side.
re]
Remove the tape and tilt the door away from
the cabinet.
Lift the door off the bottom
hinge
pin.
r_l REMOVE THE FREEZER DOOR
(For models with freezer door) (cont.)
r_
Remove the button plug from the left side of
the door. Remove the door thimble from the
right side of the door. Install the door thimble
into the hole on the left and the button plug
into the hole on the right.
r_
set the door on a non-scratching
surface, with
the inside up.
[] TRANSFER CENTER HINGE BRACKET
_1 Using a 5/16" socket ratchet/driver,
remove the
bolts securing the center hinge to the cabinet.
FB1 Transfer the plug button and screw hole cover in
the hinge holes on the left side to the right side.
ol
rc1 Install the new center hinge bracket from the
kit on the left side.
2
Advertisement
