Haier BD-478A Service Manual page 10

Installation and Accessory Parts
l Do not over fill freezer for proper internal air circulation.
Electrical Requirement
l
ake sure there is a suitable power Outlet (220V) with proper grounding to
M
power the freezer.
l
Avoid the use of cutting off the third grounding , this is a dangerous practice
since it provides no effective grounding for the freezer and may result in
shock hazard.
Install Limitations
l
Do not install your freezer in any location not properly insulated or heated e.g.
garage etc,
l
Select a suitable location for the freezer on a hard even surfaces away from
direct sunlight or heat source e.g. radiators, baseboard heaters, cooking
appliances etc, Any floor unevenness should be corrected.
PDF created with pdfFactory trial version
INSTALLATION AND ACCESSORY PARTS
９
www.pdffactory.com