Table of Contents
Advertisement
5.1
Park position
When storing the system, you should set it in the park position. In the park position the dish is rotated so
that the system is best suitable for storage.
Press on the blue park button (2) and you will see these messages:
Before storing the system, first disconnect the power supply before disconnecting the coaxial cable ans
disassembling the antenna with the tripod etc. (Optionally, a special bag is available in which you can store the
system).
6.1
Stop button
You can push the red Stop button(8) at any time and as a result, the system will stop all actions and will
start over by displaying the satellite choice menu
7.0
Error messages
7.1
No satellite found, check manual
When the satellite has not been found, you will receive the following message:
1.
Check whether there are any obstructions. (See section 2.1)
2.
Check if the latest Travel Vision R6 ® software version has been installed for any possibly changed
satellite frequencies. See
3.
You are possibly outside the broadcast area of the desired satellite.
7.2
Satellite found, but no picture
Check the coaxial cable between the power inserter and your satellite receiver.
Check the connection cables between your satellite receiver and your television.
Switch the receiver and the television off and back on.
Check the user manuals of your satellite receiver and television.
CAUTION PARKING
IN ... SEC
SYSTEM
PARKED
MODULE CAN BE
REMOVED
SYSTEM STOPPED
SATELLITE
NOT FOUND
PLEASE CONSULT
MANUAL
www.travel-vision.com
or consult your dealer.
Page 14
Advertisement
Table of Contents
