Tty Operation - Motorola Motorazr Ve20 User Manual

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must plug the
TTY device into the phone's headset jack and set the
phone to operate in one of three TTY modes.
Use a TSB-121 compliant cable (provided by the TTY
device manufacturer) to connect the TTY device to the
phone.
Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as needed to
minimize errors.
For optimal performance, your phone should be at
least 12 inches (30 centimeters) from the TTY device.
Placing the phone too close to the device may cause
high error rates.
set TTY mode
ù When you set your phone to a TTY mode, it
operates in that mode whenever the TTY device is
connected.
s
Find it:
u
> Settings > Call
1 Scroll to TTY Setup and press
2 Scroll to one of the following TTY Setup options and
s
press .
option
Voice Set to standard voice mode.
TTY Transmit and receive TTY characters.
VCO Receive TTY characters but transmit by
speaking into phone microphone.
HCO Transmit TTY characters but receive by
listening to phone earpiece.
s
.
basics 31