Picture Control Functions - Haier LR47T1 Owner's Manual

Picture Control Functions

Palette(Color Adjustment Panel for Eye-pleasing)
Press CH +/- button to select Palette for Eye-pleasing,
press VOL +/- button to enter the submenu, and press
CH +/- button to select "User", "Standard", "6500K",
"7500K", "8500K" and "9300K" six color adjustment
modes according to your personal preference for color.
In general, "Standard" mode is recommended.
If you select the "User" mode, press VOL +/- button to open
the Color Adjustment Panel Menu (see the right figure); press
VOL +/- button to select different color standards of
2500K~15000K from warm color to cold color; select the
standard bit, press CH +/- button to adjust the standard
bit in the range of -50~+50, and the original data of color bits
will be automatically deleted when selecting adjustment of the
standard bit.
Reset
Restoring Original State of Ex-factory.
Aspect Ratio Control
Press the PIC.SIZE button the Aspect Ratio menu appearance
on the screen.
Full Screen
Choose Full Screen when you want to adjust the picture
horizontally, in a linear proportion to fill the entire screen.
4:3 mode
Choose when you want to view a picture with an original 4:3
4:3
aspect ratio, with gray bars appearing at both the left and right
sides.
Zoom
Choose when you want to view the picture without any
Zoom
alteration. However, the top and bottom portions of the
picture will be cropped.
Cinema
Choose cinema mode when you view the film picture to be
altered, the top black band will disappear.
Note: If a fixed image is displayed on the screen for a long
time, it image may become imprinted on the screen and
remain visible.
menu
19