Bosch SPX5ES55UC/06 Installation Instructions Manual page 12

Your dishwasher comes with a two-piece toe panel to al-
low height adjustment.
1. Position the slotted rear toe panel on the dishwasher
first. Allow it to rest on the floor.
2. Position the mating front toe panel on top of the rear toe
panel allowing the angled edge to rest on the mating
edge of the dishwasher,
3. Drive the two black screws (A) through the holes in the
toe panel to secure. Use the supplied screws to avoid
damaging the dishwasher. See Figure 24.
Figure 24
12