Dvd Connection - Haier L26A16 Owner's Manual

External Equipment Connections

DVD connection

How to connect
1
. Connect the DVD video outputs (Y,
Pb/Cb, Pr/Cr) to the HDTV IN jacks on the
TV and connect the DVD audio outputs to
the HD-AUDIO jacks on the TV, as shown
in the figure.
2
. If your DVD only has an SCART output
jack, connect this to the SCART input on
the TV. as shown in the figure.
How to use
1
. Turn on the DVD player, insert a DVD.
2
. Use the TV/AV and VOL+/- button on
the remote control to select SCART1 or
SCART2 mode.
3
.
Press Play button on external
equipment for program play.
4
. Refer to the DVD player's manual for
operating instructions.
HDMI/DVI
HDMI/DVI
IN1
IN2
or
RGB-DTV OUTPUT
HDMI/DVI OUTPUT
Digital Set-top Box
Y
Pb/Cb Pr/Cr
PC IN IN2
IN1
Y
Pb/Cb Pr/Cr
or
R L
AUDEO
Y Pb
Y
Pb/Cb Pr/Cr
IN2
IN1
Y Pb/Cb Pr/Cr
DTV connection
-To watch digitally broadcast programs,
HD-AUDIO
purchase and connect a digital set-top box.
PC/DVI
AUDIO IN
How to connect
Use the TV`s YPbPr IN and AUDIO IN jacks,
HD-AUDIO
PC or HDMI/DVI VIDEO port for video
connections, depending on your set-top
box connections available. Then, make the
corresponding audio connections.
How to use
1
. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2
. Use TV/AV on the remote control to
select HDMI mode.
3
.
Press Play button on external equipment
for program play.
Pr R AUDEO
SCART1
SCART2
ANT IN
RGB
Y/C
or
DVD
HD-AUDIO
PC/DVI
AUDIO IN
HD-AUDIO