Gigabyte 6VMM User Manual page 16

6VMM Motherboard
F F For Auto Jumper Setting:
« « Note:
1. If you use 66/100/133 MHz CPU, We recommend you to setup your system speed to
"Auto" value.
2. We don't recommend you to set up your system speed to 75 , 83 , 112 , 124 , 140 ,150
MHz because these frequencies are not the standard specifications for CPU, Chipset
and most of the peripherals. Whether your system can run under
83 ,112 ,124 ,140 ,150 MHz properly will depend on your hardware configurations: CPU,
SDRAM, Cards, etc.
TM
1. Celeron 300A/ 66 MHz FSB
SW2
SW2
ON
ON
13
SW1
75 ,
ON
SW1