External Equipment Connections - Haier HL42XR1 Service Manual

5.1 External Equipment Connections
NOTE: All cables shownare not included with theTV.
Choose Your Connection
There are several ways to connectyour television,
depending on the components you wantto connectand
the quality of the signal you want to achieve. The
following are examplesof some different ways toconnect
your TVwith differentinput sources.
Connecting aVCR
Toavoid picture noise(interference), leave anadequate
distance between theVCR and TV.
Connection Option 1
Set VCRoutput switch to channel3 or4 and then tune
the TVto the same channel number.
Connection Option 2
1. Connect theaudio and videocabtes from theVCR's
output jacks to theTV input jacks, as shown in the figure.
When connecting theTV toVCR, match the jack colors
(Video =yellow,Audio Left =white, andAudio Right = red).
If you connect a S-VIDEO outputfrom VCRto the
S-VIDEO input, the picture quality is improved;
compared to connectinga regular VCRto the Video input.
2. Inserta video tape into the VCRand press PLAY on
the VCR. (Referto the VCRowner's manual.)
@@
O Q
0@
Y Pb Pr
@ @ DV, AUD,O
©"@',o
L-AUDIO-R VGA AUDIO VGA
@@ @@
L-AUDIO -R JVIDEO L-AUDIw
3. Setect the inputsource with using the
INPUT button on the remote control, and
then pressA/V button to select the source,
press ENTER button to confirm.
n
[]
i....... VCR
16