Storage Drawer; Oven Door - Amana AER5524XAD1 Installation Instructions Manual

30" (76 cm) freestanding electric ranges
Hide thumbs Also See for AER5524XAD1:
Table of Contents

Advertisement

To Replace:
1. Align the forward drawer notches with the notches in the
drawer glides on both sides.
Place the rear alignment tabs into the drawer glides on both
sides.
A. Drawer alignment
tab
B. Drawer gfide notch
2. Push the warming drawer or premium storage drawer in all
the way.
3. Gently open and close the warming drawer or premium
storage drawer to ensure it is seated properly on the glides
on both sides.
3. Slowly push the drawer into the range.
A
\
\
A. Engage drawer glide.
NOTE: When properly installed, the rear slides on the bottom
of the drawer will engage the base rails and the drawer will
not tip when items are placed in the drawer.
Ov@Ys L_S[
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open oven door all the way.
2. Pinch the hinge latch between two fingers and pull forward.
Repeat on other side of oven door.
++,
v_ ,_ .v
,.+
,<J _,'
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
1. Pull the storage drawer straight back to the drawer stop.
A. Drawer stop notch
2. Lift up the front of the drawer and pull the drawer out.
To Replace:
1. Lift up the front of the drawer and place the rear of the drawer
inside the range so that the drawer stop notch is behind the
drawer glide.
2. Lower the drawer so that the edge of the slide rail drops into
the slot in the drawer glide.
3.
4.
A. Hinge latch
Close the oven door as far as it will shut.
Lift the oven door while holding both sides.
Continue to push the oven door closed and pull it away from
the oven door frame.
To Replace:
1. Insert both hanger arms into the door.
2.
3.
Open the oven door.
You should hear a "click" as the door is set into place.
Move the hinge levers back to the locked position. Check
that the door is free to open and close. If it is not, repeat the
removal and installation procedures.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents