Table of Contents
Advertisement
Menu Operations
Function Menu Options Continued
TT2 to TT4 :For other modes of information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
IMPORTANT: Closed captioning availability entirely depends on broadcasters
supplying the signal. Therefore, closed captioning might not always be
available and language availability will differ by broadcast.
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
5.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen
will turn blue after 3 seconds if there is no signal.
6.ASPECT RATIO: Press to select display mode.(FULL SCREEN and ZOOM
for model HLA15; FULL SCREEN ,4:3,16:9,CINEMA and ZOOM for model
HLA19)
7. RESET : Press VOL+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
Note: This menu appears only in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Functions:
AUTO CONFIG :
parameters .
PHASE :
Removes any horizontal distortion and clears or sharpens the displayed
characters .
CLOCK :
Adjust the TFT-LCD to match the PC input source clock frequency
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
Automatically adjusts picture location frequency and phase
ADJUST
0
50
50
50
Advertisement
Table of Contents
