Table of Contents
Advertisement
4.
Once your computer is back up, plug the camera into your computer's USB port.
Right-click on the "My Computer" icon. Select properties.
5.
If you are running Windows 2000 or XP: click on hardware and then Device Manager.
If the camera is installed correctly, there will be a category listed for "Imaging Devices" and clicking on the "+"
next to it should reveal your camera. If not, you will likely see "Digital Still Camera" under "Other Device" with a
brightly colored marking next to it indicating it is not functioning correctly.
If you are running Windows 2000 or XP: Right click on the non functioning device and select uninstall. If a
warning pops up, press OK.
6.
Restart your computer again. Your camera is now successfully installed.
32
A00-0900629
Advertisement
Table of Contents
