Table of Contents
Advertisement
JCF Audio
Cabling:
The DA8-V ships with 3 included cables:
A male to male 4-pin cable for transferring power from the included analog
power supply to the main unit. This cable is wired "straight through". Pin 1 to Pin 1,
etc.
A female to female circular "ham connector" cable for transferring power from
the included digital power supply to the main unit. This cable is wired "straight
through". Pin 1 to Pin 1, etc.
A 5' standard AES to AES db25 crossover cable. This cable is for transferring
Tascam® compatible pinned AES/EBU signals to and through the main unit.
Specifications
D/A Calibration Range - (w/ factory split parallel output)
M I N
Level fully counterclockwise
0dBfs = +4.8dBu at outputs
-0.8dBfs = +4dBu at outputs
-18dBFS = -13.2 dBu at outputs
D/A Calibration Range - (w/ series outputs)
M I N
Level fully counterclockwise
0dBfs = +10.8dBu at outputs
-6.8dBfs = +4dBu at outputs
-18dBFS = -7.2 dBu at outputs
J C F A u d i o
M A X
Level fully clockwise
0dBfs = +24.8dBu at outputs
-20.8dBfs = +4dBu at outputs
-18dBFS = +6.8 dBu at outputs
M A X
Level fully clockwise
0dBfs = +30.8.dBu at outputs
-26.8dBfs = +4dBu at outputs
-18dBFS = +12.8 dBu at outputs
7
D A 8 - V
Advertisement
Table of Contents
