North Road Technologies Geyser 6000–3.0 Installation & Owner's Manual

Heat pump water heater

Advertisement

Quick Links

Hot water runs out, (HPWH continues to run)
Hot water runs out, HPWH does not run)
Heavy accumulation of frost on the
unit, extending through the air filter
Heat pump is noisy (more than 60 dB)
SECTION 8 -WARRANTY
LIMITED WARRANTY TO ORIGINAL PURCHASER
The Geyser 6000–3.0™, supplied by North Road Technologies, L.L.C. (NRT) and delivered new, in the
original packaging to the original end‐user, is warranted by NRT as follows:
One (1) year warranty from defects in workmanship and materials.
Five (5) years limited warranty on the sealed refrigeration system only.
This limited warranty begins on the original date of purchase or 180 days from the date the unit was manufactured,
whichever comes first. The warranty is valid only on products purchased and used in the United States and Canada.
To receive warranty service, the purchaser must contact NRT for problem determination and service procedures.
The original dated bill of sale must be presented upon request as proof of Purchase. Within these periods, a new or
remanufactured replacement part, at NRT's sole discretion, will be supplied by NRT, providing the defective part is
first returned, at customer's expense, to NRT for inspection. Optionally, the entire Geyser 6000–3.0 may be returned
at customer's expense to NRT for repair. Repair work done at NRT's facility will be at no charge providing the repair is
required because of a defect in workmanship or materials. The replacement part or parts assume the unused portion
of the warranty. The warranty does not include labor or other costs incurred for diagnosis, repairing (except in NRT's
facility as above) or removing, installing or shipping the defective or replacement parts.
The limited warranty covers manufacturing defects in materials and workmanship encountered in normal use of this
product and shall not apply to the following, including but not limited to: consumable items such as filters; damage
which occurs in shipment, delivery and installation; applications and uses for which the product was not intended;
altered product or serial numbers; cosmetic damage or exterior finish; damage from accidents, abuse, neglect,
fire, water, lightning, or other acts of nature; external plumbing or leaks; external wiring; circuit breakers, fuses,
connectors or hoses not supplied and authorized by NRT; use of products, equipment, systems, utilities, services,
parts, supplies, accessories, applications, installations, repairs not supplied or authorized by NRT, and failure to
follow operating instructions.
NRT MAKES NO WARRANTY AS TO THE FITNESS OF THE EQUIPMENT FOR A PARTICULAR USE AND SHALL NOT BE LIABLE
FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN CONJUNCTION WITH THIS CONTRACT AND/OR THE USE
OF THE EQUIPMENT. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
BUYER AGREES TO INDEMNIFY AND SAVE HARMLESS NRT FROM ANY
other rights, which vary from state to state.
CLAIMS OR DEMANDS AGAINST NRT FOR INJURIES OR DAMAGES TO THIRD PARTIES RESULTING FROM BUYER'S
INSTALLATION, USE OR OWNERSHIP OF THE EQUIPMENT.
—20—
1. Tank thermostats are set too low or are
defective
2. Dip tube in tank is broken
3. More than appropriate water use for the tank
size
4. The air filter or coil fins are clogged or dirty
5. The unit remains in defrost mode
Defective HPWH component, refer to
schematic to troubleshoot
The defrost thermostat or system control relay
could be defective
1. Check for loose fasteners
2. Check for vibrating fan guard
3. The noise may be normal, but unfamiliar
to the user, a short 10" insulated
flexible duct connected to the fan
outlet with a 90º bend will reduce
noise considerably
4. The HPWH is not intended to be installed in
living quarters, unless it is understood
that some additional noise will be
heard
The Geyser 6000–3.0™ Heat Pump Water Heater
Installation & Owner's Manual
North Road Technologies, L.L.C.
SM
http://northrdt.com

Advertisement

Table of Contents
loading

Summary of Contents for North Road Technologies Geyser 6000–3.0

  • Page 1 SECTION 8 -WARRANTY LIMITED WARRANTY TO ORIGINAL PURCHASER The Geyser 6000–3.0™, supplied by North Road Technologies, L.L.C. (NRT) and delivered new, in the original packaging to the original end‐user, is warranted by NRT as follows: One (1) year warranty from defects in workmanship and materials.
  • Page 2: Safety Information

    SAFETY INFORMATION SECTION 7—TROUBLE SHOOTING GUIDE Examine your water tank; make sure it is not rusty or leaking. Depending on the Problem Possible Cause and Solution condition and age of the tank, this may be the best time for replacement. Before No hot water flow at tap.
  • Page 3: Please Keep These Instructions For Reference

    SUPPLYING POWER TO THE WATER HEATER. FAILURE TO DO SO MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR DEATH. GEYSER Internal Wiring Diagram The GEYSER 6000–3.0™ from North Road Technologies requires very little in the way of maintenance to ensure a long and trouble free life for your unit. AIR FILTER—...
  • Page 4: Table Of Contents

    The GEYSER 6000–3.0™ will remove moisture from the air. It is an effective dehumidifier, and, depending on run time, may provide all necessary Contents dehumidification. However, it will only dehumidify while it is running. As more hot water is used, more dehumidification is provided. The moisture may occasionally cause frost to form on the evaporator.
  • Page 5: Geyser 6000-3.0

    The Geyser 6000-3.0™ from North Road Technologies is a Heat Pump Water to put a “T” in the cold water Heater that makes use of a renewable energy source – the air in your basement, supply to the water heater, garage or utility room –...
  • Page 6: Grounding Instructions

    SYSTEM REQUIREMENTS Wire tie the bare lead from the Geyser The GEYSER 6000–3.0™ can only be placed in dry/covered location, in areas where the temp to the lead just removed from the tank, will not fall below 40°F. (4.5°C.). If using the unit in an attic, garage or basement, the unit using the wire nut that comes with the can be installed without any additional equipment.
  • Page 7 Find the electrical cord unit that is pre-assembled with the strain-relief mechanism on the exposed end. Insert the cord through the hole just drilled in the cover. Inside the GEYSER 6000–3.0™ package, you will find the GEYSER 6000–3.0™ water heater unit, plus all fittings, drain hose, and all required components to ensure a safe operating system.
  • Page 8: Section 2-Location

    SECTION 2—LOCATION SECTION 4—ELECTRICAL •The GEYSER 6000–3.0™ can be set on the floor, or on blocks of wood or concrete. Care The Electrical Connection Kit consists of: should be exercised when mounting the GEYSER 6000–3.0™ that vibration and noise are not (1) wire nut transmitted to other areas.
  • Page 9 Now, apply thread seal tape to, and install the second valve, (item 104), onto the second “T” Locate drain valve at bottom of fitting. tank. Make sure that all valves are closed tightly, and open the tank fill valve. Check for any leaks in the piping and fittings you have just [Note that the tank flushing process is intended to remove all installed.
  • Page 10 Then apply thread seal tape to both ends of the brass fitting with the After the nipple, (Item 102) is plastic water in-feed tube (Item properly installed on the tank, 105), and insert/screw the fitting make a connection between the into the front end of the ‘‘T”, and thermistor leads and the GEYSER tighten snugly.

Table of Contents