Listen LT-800 User Manual page 25
Stationary transmitter, portable transmitter, programmable display receiver, display receiver, digital receiver, stationary receiver / power amplifier, this manual is for both 72 and 216mhz systems
Hide thumbs
Also See for LT-800:
- Design manual & manual (84 pages) ,
- User manual (24 pages) ,
- User manual (28 pages)
Table of Contents
Advertisement
Operating Listen Receivers
Adjust the volume control
3
level.
To Lock into Only One Channel:
4
Press and hold the SEEK button for 5+ seconds to
lock a receiver onto the currently tuned channel.
Press and hold the button again to unlock. When
locked the LED on top of the unit will flash when you
press the SEEK button.
Is the Channel Locked on My Receiver?
On the LR-400 and LR-500, when the channel is locked, the
padlock icon will appear on the display. If the unit is locked,
the red LED on the top of the unit will flash when you press
the SEEK button.
Padlock appears when
locked (LR-400 and LR-500)
LISTEN TECHNOLOGIES CORPORATION +1.801.233.8992 1.800.330.0891 Fax: +1.801.233.8995
Internet: www.ListenTech.com
to a comfortable
If locked, LED flashes on all
portable receivers when SEEK
button is pressed.
All specifications subject to change without notice.
R
25
Advertisement
Table of Contents
Troubleshooting
