Jenn-Air MK2167 Installation Instructions Manual page 4

3. Align the center arrows on the bottom duct with the centerline
drawn in Step 1 above.
4=
/////
A B
A. Bottom duct
B. Center arrows, aligned with centerline
Mark the three mounting holes through the bottom duct onto
the cutout floor.
?
I
I
I
I
I
I
g
A. Short screws (3)
B. Bottom duct mounting holes
5. Using 7/64" drill, drill pilot holes into the three holes marked in
Step 4.
6. Realign and install the bottom duct with three short screws.
7. Using 7/64" drill, drill pilot holes through the four mounting
holes of the bottom duct flange into the bottom front facing of
the cutout/cabinet opening.
A B
1. Gently return microwave oven to its upright position.
2. Position microwave oven near cutout opening.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Plug in microwave oven.
4. Align the rails with the rail guides on the bottom duct.
A. Bottom duct flange
B. Mounting holes