Playback Procedure - Electrohome 20EV701 User Manual

NOTES:
• If a non-compatible disc is loaded,
"Incorrect Disc", "Region Code Error"
or "Parental Error" will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 8 and 39).
• Some discs may take a minute or so
to start playback.
• A "Prohibition" symbol
at the upper left of the screen. This
symbol means either the feature you
tried is not available on the disc, or the
unit can not access the feature at this
time. This does not indicate a problem
with the unit.
• When you set a single-faced disc label
downwards (ie. the wrong way up),
"Reading" will appear on the display
and then "Incorrect Disc" will be
displayed.
• Some playback operations of DVDs
may be intentionally fixed by software
producers. Since this unit plays DVDs
according to the disc contents the
software producers designed, some
playback features may not be available.
Also refer to the instructions supplied
with the DVDs.
5N10721A_EN_P27-32
1
Press TV/DVD to select DVD mode.
2
Place the disc in the disc
slot with the label side
facing forward. (If the disc
has a label.) Hold the disc
without touching either of
its surfaces, align it with
the guides, and place it in
position.
3
On the screen, "No Disc"
changes to "Reading" and
then playback will
commence.
• A menu screen may
appear on the TV screen,
if the disc has a menu
feature. In this case,
press
ENTER to operate a
menu feature.
4
Press STOP to end playback.
• The unit memorizes the stopped point, depending on
the disc. "
resume playback (from the scene point).
• If you press STOP again ("
or unload the disc, the unit will clear the stopped point.
5
Press 5 5 5 5 5 (EJECT).
may appear Remove the disc and then press POWER.
The unit turns off.
When you eject the disc, you may hear mechanism noise,
but it is not malfunction.
27

Playback procedure

No Disc
, , , or
Reading
" appears on the screen. Press PLAY to
" appears on the screen)
4/25/05, 17:25
27