Closing The Camera Podz - ION Air Pro User Manual

Closing the Camera PODZ

The Waterproof Housing lets the camera perform up to
10 meters or 30 feet under water. You must seal the
camera with PODZ in order to protect the camera when
using it in wet or moist conditions.
To secure the PODZ
1. Attach the PODZ to the back of the camera and rotate
clockwise until two dots are aligned
2. Slide the latch on the PODZ to lock it.
 F ailure to properly seal your camera can result in leaks

that damage or destroy your camera. Your warranty
does not cover water damage resulting from user
damage.
The rubber seal on the PODZ forms the waterproof

barrier to protect the camera in wet and underwater
conditions. You must keep this seal clean as a single strain of hair or grain of
sand can cause a leak into the product.
After every use in salt water, you will need to rinse the outside of the product and

the seal with non-salt water and dry. Not doing this can cause corrosion in the
product or failure in the seal, in turn, damaging the product.
www.iontheaction.com EN -
15