Table of Contents
Advertisement
Operate the Dishwasher
Before you start your dishwasher,
check the following:
•
Dishwasher
is level and securely fastened in place.
•
Water supply is turned on.
•
No leaking from joints.
•
All wire connections are tight.
•
Electricity is turned on.
•
No kinks in water or drain lines.
•
All packing material
and customer literature have been taken out of the dishwasher.
Operate the machine
through
at least one fill and pump-out.
•
Check water level after dishwasher
has filled completely.
Water should fill to the heating element.
•
Check for satisfactory
pump-out.
At end of pump-out,
a small amount of water in the bottom of the tub is
normal,
•
Check
for leaks.
If operation is satisfactory,
replace
the access
panel/toeplate.
NOTE to INSTALLER:
Put installation
instructions
back in the literature
packet
and leave with
dishwasher
so all information
will be readily available
to user.
NOTE
to OWNER:
Please
read the dishwasher
Use & Care Guide. It contains
important
safety
Information
for those operating
the appliance.
It also contains
many suggestions
for obtaining
the best results
from your dishwasher.
14
- Quick Links:
- Preparing for Installation
Hide quick links:
Advertisement
Table of Contents
