The Second Step; Congratulation Page - Sumvision CYCLONE HD User Manual

The second step

Step 2: Hard disk format
Press and
When highlight move the Format button, Press

Congratulation page

When complete the format, the system will display the congratulation page.
Select OK button and Press
When you preparing to format hard drive please consider the file format you planning to used.
FAT 32 is READ and WRITE partition. Data recorded and transfer by network can only be store on
the fat32 partition. "Please note you can transfer data on the FAT32 by USB too".
NTFS is READ only partition .Cannot record or transfer data by network onto NTFS partition. "Please
note to transfer data on to NTFS partition is done only by USB and NTFS can support media file over 4GB
which FAT32 cannot".
on the remote control to select back or format.
to exit.
to start. Otherwise, select back button to back.