Accessing Ipod Mode; Controlling Playback - Jensen Heavy Duty JHD1620 Installation And Operation Manual

This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following iPod versions are supported:
• iPod Nano (1G, 2G, 3G, 4G and 5G)
• iPod 5G
• iPod Classic
• iPhone, iPhone 3G, iPhone 3GS
• iPod Touch
• iPod Touch 2G
NOTE: Earlier model iPods are not supported because they do not implement the
required control protocol. Also, the iPod Shuffle is not supported because it does not
utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be
connected to the radio using one of the Auxiliary Inputs.
NOTE: iPod and iPod Cable sold separately.

Accessing iPod Mode

To enter iPod mode from any other source, press the MODE
button (4) until "iPod" appears on the lower left corner of the
display. If the user connects an iPod containing no songs,
the radio will display a message stating "No Songs" when it
enters iPod mode.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod is
connected to the 30-pin iPod cable, as long as the vehicle
ignition is turned on. You can turn the iPod off by
disconnecting it from the cable or by turning the ignition off.
When the ignition is turned off, the iPod will pause and then
enter sleep mode after 2 minutes. While the iPod is
connected, the power cannot be turned on or off from the iPod itself.
NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vehicle ignition is turned on.

Controlling Playback

Pausing Playback
During playback, press the MUTE/>|| button (17) to pause the iPod player. "Pause" will appear
on the LCD. Press MUTE/>|| again to resume playback.
Repeat Play
During playback, press the 1/RPT button (8) to repeat the current song. "RPT" will appear on
the LCD. Press 1/RPT again to stop repeat playback.
Intro Play
During playback, press the 2/INT button (6) to play the first ten seconds of each song. "INT" will
appear on the LCD. Press 2/INT again to stop intro playback.
Random Play
During playback, press the 3/RDM button (5) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing. "RDM" will
13 Din iPod Ready Cable
appear on the LCD. Press 3/RDM again to stop random playback.
Selecting Tracks
HEAD UNIT
During playback, press the TUNE/SEEK |<< / >>| buttons (18, 19) to play the previous or next
track in the current category. Press the TUNE/SEEK |<< button (18) once to play the song from
the start position or press TUNE/SEEK |<< twice to play the previous track. Pressing the
TUNE/SEEK |<< button (18) during the first 2 seconds of a track will play the previous track.
After 2 seconds, this action returns to the beginning of the current track.
Pod Phone Pod
Press and hold the TUNE/SEEK |<< / >>| button (18, 19) to fast reverse/forward the song.
NOTE: If you press and hold the TUNE/SEEK |<< / >>| button to change the current song
iPod Cable
to the previous/next song, you will exit fast reverse/forward mode.
Playlist Search
Press the PTY/CAT/MENU button (2) to access Playlist selection mode. While in Category
mode, press the TUNE/SEEK |<< / >>| buttons (18, 19) to choose file search by Playlist, Artist,
Album, Genre, Song, Audiobook or Podcast. Press the INFO/ENTER button (16) to select the
search mode. Use the TUNE/SEEK |<< / >>| buttons to search the available files on the iPod.
Press the INFO/ENTER button to play the selected song or file.
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the display information between single and
double line text display.
12
JHD1620