Page 1
SF10 SUBWOOFER I n s t a l l a t i o n & O p e r a t i o n M a n u a l...
Page 2
SF10 Subwoofer Break In Period Allow 10-15 hours of listening time to adequately break-in the SF10 Subwoofer. During the break-in period, the driver suspension will loosen. The result of break-in will be an increase in low frequency response, improved definition,...
Page 3
Subwoofers can add considerable low- frequency, deep bass performance to any home theater or audio system. At the heart of the Destination Audio SF10 powered subwoofer is a aluminized fiberglass matrix cone driver. The driver material produces enhanced bass definition and accuracy.
Page 4
Setup Suggestions (continued) Placing the subwoofer away from walls will provide the least reinforcement, making the bass sound subjectively thinner than if the woofer were closer to a wall. Good results can usually be obtained by placing a subwoofer along a wall 1-3 feet from a corner.
Page 5
Increasing the crossover frequency will allow more mid-bass output from the subwoofer. Decreasing Back View of SF10 Subwoofer the frequency will cut more mid-bass output from the subwoofer. 3. Phase Control: This control changes the phase of the subwoofer.
Page 6
Specifications Model: SF10 Frequency Response: 30Hz-150Hz ±3dB Amplifier Power: 100 Watts Woofer: 10” Aluminized Fiberglass Matrix Crossover Frequencies: 50-150Hz Dimensions: 13”H x 14½”W x 16”D Weight: 27 lbs. Troubleshooting Situation: Probable Cause: Solution: No sound from Amplifier is not connected Make certain the amplifier is subwoofer(s) to constant power outlet.
Page 7
Warranty Your Destination Audio SF10 subwoofer is covered by a limited warranty against defects in materials and workmanship for a period of 5 (five) years on the woofer and cabinet, and 1 (one) year on the amplifier from the original date of purchase.
Need help?
Do you have a question about the SF10 and is the answer not in the manual?
Questions and answers