Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Shintaro SH-ICR3USB3
Summary of Contents for Shintaro SH-ICR3USB3
- Page 1 Blazer USB 3.0 Internal Card Reader User Manual SH-ICR3USB3 shintaro.com.au...
-
Page 2: Table Of Contents
Blazer USB 3.0 Internal Card Reader Contents Introduction Key Features System Requirements Package Contents Hardware Installation Front View Icon Program Installation Product Specifications shintaro.com.au... -
Page 3: Introduction
Introduction The Shintaro Blazer USB 3.0 internal card reader is ideal for a 3.5 inch drive bay installation. It provides an excellent solution for direct access to the front of your computer. If the host PC is not equipped with a USB 3.0 controller, our adapters for the PCI-E card or the express-card slot are the perfect alternatives. -
Page 4: Key Features
Key Features • Supports SDXC/SD 3.0 UHS-1; CF UDMA6; xD; Micro-SD/M2 • SDXC’s extended capacity up to 2 TB • Slots can be used at the same time for data exchange • Work on Bus-powered, no external power supply required •... -
Page 5: Package Contents
Do not touch any electronic components. Turn off your computer and disconnect the power cord before installing this product. Follow the steps below to install SH-ICR3USB3 Internal Card Reader. Remove the cover of your computer. (Refer to your computer hardware manual for instructions on removing the cover) Remove the 3.5 inch drive bay’s plastic cover on the PC front panel. - Page 6 3. Put the Shintaro Blazer USB 3.0 internal card reader with cables into the drive bay. 4. Mount the internal card reader firmly in both tracks of the drive bay with the four screws provided. 5. Connect the USB cables from the Shintaro Blazer USB 3.0 internal card...
-
Page 7: Front View
Note: If your computer’s USB Port is outside the chassis, please remove it first as seen below. 6. Another option is to connect the USB cables to the header adaptor provided and plug directly to the motherboard. 7. Plug the power cord back in then start to install the driver of the Internal USB 3.0 Card Reader. - Page 8 The xD slot is located in top-left, front bezel. Note: When inserting xD memory card into the card reader slot, you should flip it to the back as seen below. The slot is located in the middle of the front bezel, it is labeled “SD” which can accept Secure Digital cards (SD), mini SD, Multi media cards or RS MMC etc.
- Page 9 Note 2: When inserting the Mini SD memory card, align it to the left of the slot. M2/Micro SD The Micro SD also named T-flash is labeled as “M2/Micro SD” which accepts Micro SD and M2 memory card without the adapter. This slot is labeled “cf”...
-
Page 10: Icon Program Installation
It will flash while data is transmitting. Icon Program Installation After you install the internal card reader to your PC then you need to install the SH-ICR3USB3 Card Reader Icon Program. Windows XP/VISTA/7 Insert the program disc into the CD-ROM/DVD-ROM drive. -
Page 11: Product Specifications
Win XP, Win Vista 32/64, Win 7 32/64 System Support Linux Kernel ( USB2.0 only ) * The SH-ICR3USB3 with one USB 3.0 passes through port. * Win XP does not support Exfat format. * Specifications are subject to change without notice. - Page 12 support@shintaro.com.au...
Need help?
Do you have a question about the SH-ICR3USB3 and is the answer not in the manual?
Questions and answers