Advertisement
User's Manual
Operation Instructions
A.
Batteries
Loading the Batteries
l
Make sure the camera is turned off. Open the Battery and Memory
Card Compartment by sliding the lock. Follow the illustration to
insert the batteries in the direction shown.
compartment.
Low Battery Condition
l
1.
A battery meter icon
the LCD Display.
2.
When batteries drops to a certain low voltage level, the camera
will alarm you with the icon flashing.
3.
You have to re-charge the batteries or replace with 2 new
ALKALINE Batteries.
Charging the Batteries
l
The 2 x AA battery in the package are re-chargeable.
1.
Connect the USB cable to the camera and computer. The LED
Indicator will flash.
charging automatically. The LED Indicator will flash fast.
2.
When batteries are nearly fully charged, LED indicator flash
normally. To stop battery charging, press again Power Switch.
3.
It takes around 6 hours to complete battery charging from empty
to full (1600MAH).
Note :
The camera can still work as web camera and removable disk when
battery charging is in progress.
UNI CAM 3.1 Digital Camera
shows the level of battery condition on
Press Power Switch to start battery
- 6 -
Close the battery
Advertisement
