Phoenix Arctic Max Owner's Manual

Therma-stor phoenix arctic max

Advertisement

Quick Links

Owner's Manual — Phoenix Arctic Max
The new Phoenix Arctic Max is the first portable air condi-
tioner designed specifically for the Restoration Industry.
The Phoenix Arctic Max boasts one ton (12,000 BTUs) of
cooling capacity operating in 95°F and 60% conditions while
drawing under 12 amps. In a single pass, this provides a
15 degree temperature drop on the 430 CFM evaporator
(cooling) air stream and water removal equivalent to 100
pints per day.
The Phoenix Arctic Max gives the restoration contractor vital
temperature control in the affected area to optimize drying
efficiency or in unaffected areas to safe-guard occupant
comfort. The Phoenix Arctic Max's cooling power also
makes it the ideal accessory to pre-treat air to improve the
The Phoenix Arctic Max
Portable Air Conditioner
• 1 Ton, 12,000 BTUs of Cooling*
• 100 Pints/Day of Water Removal*
• 11.8 Amps*
• Adjustable Thermostat
• Easy Set-up and Operation
• Cooling (Evaporator) Airflow 430 CFM
• Exhaust (Condenser) Airflow 430 CFM
• Multiple Ducting Options
• Multiple Filter Options
• 20 ft. Vertical Lift Condensate Pump
• 30 ft. Drain Hose
• 20 ft. Power Cord (grounded)
• Recessed Wheels
• Legendary Stainless Construction
*95ºF/60% RH
Specifications subject to change without notice.
Toll-Free 1-800-533-7533
4201 Lien Rd • Madison, WI 53704
Installation, Operation and Service Instructions
Read and Save These Instructions
performance of desiccant or LGR dehumidifiers. When used
in conjunction with the Phoenix Solution LGR performance
amplifier, the Phoenix Arctic Max provides a reliable cooling
air stream to maximize overall performance. The Phoenix
Arctic Max features thermostatically controlled cooling to
insure maintenance of desired conditions and prevent
potential over-cooling.
Set-up and operation is simple using the Phoenix window
accessory kit, and a 15 amp outlet. The Phoenix Arctic Max
also features filter efficiency options up to MERV-11, an
internal condensate pump with 30 foot drain hose and 20
foot power cord. The Phoenix Arctic Max promises years of
service and our "proven" performance.
Phoenix Arctic Max
PN 4030120
1
www.UsePhoenix.com • sales@UsePhoenix.com
TS-685
05/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Phoenix Arctic Max and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Phoenix Phoenix Arctic Max

  • Page 1: Introduction

    Owner’s Manual — Phoenix Arctic Max Installation, Operation and Service Instructions Read and Save These Instructions The new Phoenix Arctic Max is the first portable air condi- performance of desiccant or LGR dehumidifiers. When used tioner designed specifically for the Restoration Industry.
  • Page 2: Table Of Contents

    • It is designed to be used INDOORS ONLY. • If used in a wet area, plug it into a GROUND FAULT INTERRUPTER. • DO NOT use the Phoenix Arctic Max as a bench or table. • It must always be used in the upright position. Toll-Free 1-800-533-7533...
  • Page 3: Operation

    2 Operation 2.1 Transporting Condenser Exhaust Ducted Air Stream The Phoenix Arctic Max must always be upright when transported by vehicle. It may be tipped onto its handle and back for loading and moving by hand. The Phoenix Duct out of...
  • Page 4: Low Pressure Control

    3 Maintenance 4 Service 3.1 Air Filter The Phoenix Arctic Max is equipped with 2 pleated fabric air filters that must be checked regularly. The cooling air WARNING: Servicing the Phoenix Arctic Max with its high flow filter is a MERV-11 high efficiency filter. The condener pressure refrigerant system and high voltage circuitry exhaust filter is a MERV-7.
  • Page 5: Troubleshooting

    Unit removes some water but not as much as expected. 1. Air temperature and/or humidity have dropped. 2. Humidity meter and/or thermometer used are out of calibration. 3. Unit has entered defrost cycle. 4. Air filter dirty. 5. Defrost timer incorrectly set for conditions. 6.
  • Page 6: Defrost Thermostat And Timer

    4.6 Gravity Drain Option If the condensate pump fails and cannot be replaced immediately, the Phoenix Arctic Max can be used by draining by gravity. 1. Unplug the unit and remove the front cover. 2. Push the plastic plug on the left side out from inside the unit.
  • Page 7: Wiring Diagram

    6 Wiring Diagram TO CORD DEFROST TIMER (VIEWED FROM BACK OF TIMER) POWER SWITCH TIMER THERMOSTAT MOTOR TIMER SWITCH DEFROST CONTROL LO PRESSURE CONTROL BLOWER MOTOR COMP COND FAN CAP RELAY TEST HOUR BUTTON METER EVAP FAN CAP CONDENSATE PUMP FLOAT SWITCH OVERLOAD COMPRESSOR...
  • Page 8: Service Parts

    8 Service Parts Item Description Part No. Filter, Cooling, 2 x 16 x 20 4021475 Cord 4026890 Front Panel Retaining Nut, 1/4-20 6 4023362 Wheel, 8” 4025676 Wheel Hub Cap 4024816 Retaining Ring 4025454 Hub Cap Retaining Washer 4025295 Coupling Body, 1/4 Tube 4024910 Foot 4024073...
  • Page 9: Warranty

    (but all warranty periods will be extended by the period of time, if any, that the Phoenix Arctic Max is out of service while awaiting covered warranty service).

Table of Contents