Haier ESA3067 User Manual page 12

Once the mode function is established, you will have to set the fan speed. (See fig. #4)
Every time you press the SPEED button, fan speed will change between LOW, MED, and
HIGH.
1) If you choose the COOL mode you can run the fan in one of the 3 speeds: HIGH, MED,
or LOW.
2) For cool days you may want to run the "FAN" function. Here the fan runs at one of 3
speeds (HIGH fan, MED fan, LOW fan) as desired by you.
3) The dehumidify function removes excess moisture from the air on excessively humid days.
Tr: temperature inside the room.
Ts: the set temperature.
1) When Tr>Ts+3
o
2) When Ts-1 F Tr
*
o
3) When Tr<Ts-1
between the set temperature-1 and 3
4) Energy Saver: The unit runs the same as the COOL setting in the ENERGY SAVER mode.
But the fan will be off 3 minutes after the compressor cycles off.
10
o
F, the compressor will run the fan continuously at the selected speed.
o
Ts+3 F, the compressor will cycle for 10 minutes on and 6 minutes off.
*
F, the compressor will shut off. The dehumidification process takes place
o
F above the set temperature.
MODE SPEED TIMER
MODE MODE SPEED SPEED TIMER TIMER
FAN ONLY HIGH ON
COOL COOL HIGH HIGH ON ON
COOL ONLY MED OFF
FAN FAN LOW LOW OFF OFF
ENERGY LOW
SAVER
DEHUM
TEMP / TIME
TEMP / TIME TEMP / TIME
POWER
POWER POWER
ON/OFF
ON/OFF ON/OFF