Haier ESA3067 User Manual page 11

After you plug in the unit, it will perform a self test. All the display lights will turn on
for 3 seconds. The LED display will read"88". If any display light fails to turn on you
may need service on the unit. After 3 seconds, the unit will automatically go to the
stand by mode. Now all lights will be off and you will have to turn"ON" by pressing
the On/Off key. After pressing"On/Off", the unit starts to work and enters the status
of "Fan" with the low setting. You will have to press the ( ) or ( ) key on the Temp/Time
to set the temperature at your desired comfort. You can choose a temperature between
o o
61 F and 86 F. Once the temperature is set you can raise or lower it by pressing the
( ) or ( ) keys.The temperature setting can only be adjusted when the unit is in cooling,
energy saver, or dehumidifier. (See Fig. #2) Having set the temperature, you will set
the function of the air conditioner.
Every time you press the MODE button, it will change between FAN, COOL, ENERGY
SAVER and DEHUM. (See fig.#3)
MODE SPEED TIMER
MODE MODE SPEED SPEED TIMER TIMER
FAN ONLY HIGH ON
COOL COOL HIGH HIGH ON ON
COOL ONLY MED OFF
FAN FAN LOW LOW OFF OFF
ENERGY LOW
SAVER
DEHUM
TEMP / TIME
TEMP / TIME TEMP / TIME
POWER
POWER POWER
ON/OFF ON/OFF ON/OFF
9