Symbols - Homelite UT10680 Operator's Manual

Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Wear Eye, Hearing, and
Head Protection
SAFE-T-TIP Nose Guard
No Smoking
Operate With Two
Hands
One Handed
Carbon Monoxide
Kickback
Bar Nose Contact
Wear Gloves
Wear Safety Footwear
Gasoline and
Lubricant
Keep Bystanders Away

SYMBOLS

NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Wear eye protection with side shields marked to comply
with ANSI Z87.1 as well as hearing and head protection
when operating this equipment.
The SAFE-T-TIP nose guard on the guide bar helps
prevent rotational kickback.
No smoking, sparks, or open flame.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an
odorless, deadly poison. Do not operate in an
enclosed area.
DANGER! Beware of kickback.
Avoid bar nose contact.
Wear non-slip, heavy-duty protective gloves when
handling the chain saw.
Wear non-slip safety footwear when using this
equipment.
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 87 [(R + M)/2] or higher. This
product is powered by a 2-cycle engine and requires
pre-mixing gasoline and 2-cycle lubricant.
Keep all bystanders and animals at least 50 ft. away.
Page 7 — English
DESIGNATION/EXPLANATION