System Parameters - JOBO HD 1080P Operation Manual

6. Set the Parameters

Power on the camera. Press M, then press < or > to turn left or right, press
+ or － to go up and down, press OK to set the menu you select, then
press M again to exit the setting.

REC modes: video mode or audio recording mode
1080P (1920 x 1080) @ 30fps
720P (1280 x 720) @ 60fps
WVGA (848 x 480) @ 60fps
QVGA (320 x 240) @ 30fps

Photo parameter: single shot mode, three-shot mode, self-timer mode

Photo resolution: optional :3M/5M/8M

System parameters:

 Remind Sound: turn on [√] / off [X] the sound
 Date and Time: please set the time before using. The time will be stamped
at the lower right corner of the video file while recording if you choose [√].
 Loop Coverage: when it is in "Loop coverage" mode, the videos will be
saved separately every 15 minutes.
 Auto Standby: you can set the video came in auto standby mode in 0
minute, 2 minutes, 5 minutes or 10 minutes. When video camera is in the
Auto Standby mode, press the REC or DC button to wake up it.
 TV OUT format: NTSC、PAL. You can choose TV OUT format, if you
change the format, you need to re-plug the AV extension cable to make the
change efficient.
 Format: Press OK button, then press < or > to choose [√] or [X].
 Resume to default setting: this operation will resume to the default setting
 Language: English
 Frequencies: 50Hz, 60Hz; select it according to the local frequencies to
avoid the flicker caused by the mismatched frequency.
 Time and Date: set the time and date.
 LCD Power Save: Press OK button, then press < or > to set LCD Power
Save Time: 0, 2, 5 and 10 minutes later to activate the function. Press REC
or DC button to wake up it.
Note:
At Loop Recording mode, the video files will be saved separately automatically every 15
minutes. Otherwise, the video files will be saved separately automatically every 30 minutes.
7