Data Logging; Figure 17 Setting Up Data Logging - Gill Instruments MetPak RG User Manual

Contents
3.2.6
Page 28

Data logging

NOTE. MetView logs data based on the MetPak RG configuration not on the
MetView console settings.
To log MetPak RG data, click on the Logging button on the MetView console. The
Logging dialog box is displayed.
Figure 17 Setting up data logging
Setting up a logging file
Select Enable Logging to start logging to a file.
Identify the name and location for the logging file:
Log File location Click on the Browse button to identify the folder where you
want to store the data file. Enter the name of the file.
Log file header If required type some notes on the data that is to be recorded
which will appear at the top of the saved data log file.
Choose from the following additional options:
Log File Rotation Set up segmented logging with each logged file length
determined by the number entered in the text box below. The
figure 3600, for example, means that each log file length will be
3600 lines of data. Maximum entries per log file are limited to
65535 and a maximum of 2048 log files can be created.
Add Timestamp Adds the date and time to the logged data file taken from the
PC clock.
MetPak RG User Manual
©
Gill Instruments Ltd Last Change
12 March, 2013