Print A Test Page - Brother HL-5240 Quick Setup Manual

STEP 1
Setting Up the Machine
4

Print a test page

Improper Setup
DO NOT connect the interface cable yet.
1
Make sure that the printer power switch is off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
3
After the printer has finished warming up, the
Status LED stops blinking and stays green.
10
4
Press Go. The printer prints a test page. Check
that the test page has printed correctly.
Note
This function will not be available after the first
print job you send from your PC.
Now go to
Go to the next page to install the driver.