Alert Type Setup - Radio Shack 12-261 Owner's Manual

channel is detected,
CHANNEL #
appear. Then
AVL ABL E
reappears.
If no channel is detected,
AVL ABL E , BACK TO
(the preset channel) appear. Then
reappears.
AUTO
Manual
3. If you selected
CHANNEL #
appears and the broadcast begins.
Repeatedly press e or d until the
desired channel number appears.
Press g to confirm your selection.
A beep sounds and
(new channel) appears. Then
reappears. Ô
M ANUAL
4. Press
MENU
A T
LERT YPE
The Weatheradio responds to an NWS
alert broadcast in one of two ways.
Voice – An alert tone sounds for 10
seconds, and then the weather (voice)
broadcast automatically turns on for
five minutes. The alert description and
duration appear.
W EATHER
(new channel), and
AUTO
, and CHANNEL #
M ANUAL , press g .
(current channel)
CHANNEL #
to exit.
S
ETUP
,
NO CH
If you received a NOAA
broadcast on more than
one channel, the one
with the best reception
might not be the one
broadcasting
information for your
location. Contact your
local RadioShack store
or the NWS to find out
which frequency NOAA
is using to broadcast
information for your
location.
Ô Ô
NOTE
13