Pet Stop Universal Remote TRAINING SYSTEM Owner's Manual page 8

Manual Programing
In the event that the Universal Remote cannot automatically detect your particular system
frequency settings, you can manually program the remote following the steps below:
1. Simultaneously press and hold the
DOG TOGGLE button and the VIBRATE
button for three seconds or until the
POWER light is solid red.
2. Release the DOG TOGGLE and
VIBRATE buttons.
3. Press the TONE button the number
of times that corresponds to your
particular fence manufacturer and
frequency setting. The POWER light
will blink off for a short time to
confi rm your selection.
4. Press and release the VIBRATION
button. The POWER light will blink
to confi rm the number you have
selected.
8
BRAND
1 Pet Stop
2 Pet Stop
3 Pet Stop
4 Pet Stop
5 Dog Guard
6 Dog Guard
7 Dog Guard
8 Invisible Fence
9 Invisible Fence
10 Invisible Fence
11 Dog Watch
12 Dog Watch
13 PetSafe
14 PetSafe
FREQUENCY
7K
10K
14K
4K
7K
10K
15K
7K
10K
15K
7K AM
4K AM
10K
7K