General Information - Sedna SE-DECT-V1 User Manual

Dect wireless pstn / voip 2 in 1 phone
Table of Contents

Advertisement

General information

1. General Information
Please read these operating instructions carefully. If you should have any questions, please contact our
service Department on the
Under no circumstances open the unit yourself and do not try to carry out your own repairs. For any claims
under the warranty, please refer to your dealer.
Intended use – This telephone has been designed for use on an analogue telephone line (PSTN). However,
no guarantee can be accepted for trouble-free operation on all telecommunications terminal equipment
connections due to the differences between the different telecommunications network operators. The
telephone requires a TZE socket with F/M coding in common with other plug-in units such as fax machines
or modems. Connect the telephone cable to the phone socket intended for the purpose only. Do not
change the plug on the connecting cable.
Power failure – If the power should fail, it will not be possible to make calls using the telephone. Keep a
cord-connected phone handy, which works without an external power supply, for possible emergencies.
Position – There must be a 230 Volt mains socket near to where the telephone is positioned. Do not set up
the base station in the immediate vicinity of other electrical equipment such as microwaves or hi-fi systems,
as this may result in mutual interference. The location has a decisive influence on the trouble-free operation
of the telephone.
Place the base station on a flat and non-slip surface. The feet of the base station do not normally leave any
marks on the surface. However, due to the large number of varnishes and surfaces in use, it may not be
possible to prevent marks occurring on the surface due to the feet of the unit.
Do not use the handset in areas where there is a risk of explosion.
Excessive exposure to smoke, dust, vibrations, chemicals, moisture, heat or the direct rays of the sun must
be avoided.
Power supply – Use only our plug-in power supply provided, as other power supplies could damage the
telephone. There is risk to life if the power supply is opened and hot disconnected from the mains.
- 5 -

Advertisement

Table of Contents
loading

Table of Contents