Table of Contents
Advertisement
8.5 Accepting calls automatically
Incoming calls are accepted automatically when you lift the receiver from the base station. If you only want
calls to be accepted by means of the
1. Press the menu button
2. Select the HS SETTINGS menu with
3. Select the AUTO ANSWER
4. Select ON or OFF with
5. Now select further menu functions or exit the menu by pressing and holding the
8.6 Tone(TD) or pulse dialing (PD)
This feature enables you to use your telephone both on analogue exchanges (PD) and on the new digital
exchanges (TD). The factory setting is Tone dialing.
1. Press the menu button
2. Select the BS SETTINGS menu with
3. Select the DIAL MODE function with
4. Select the required dialing mode (PULSE or TONE) with
5. Now select further menu functions or exit the menu by pressing and holding
Special functions
8.7 Changing display names
The display will show when you don' t have phone call or other functions, If you have logged on several
handsets to one base station, and if it can be useful to give each handset its own name. The number after
the show with which number the handset can be called internally.
1. Press the menu button
2. Select the HS SETTINGS menu with
3. Select the HS LABEL function with
4. Now enter the required name using the number pad. Letters already entered can be deleted by
repeatedly pressing the
5. Confirm with
6. Now select further menu functions or exit the menu by pressing and holding the
8.8 Activating/Deactivating warning tones
Here, various warning tones can be activated or deactivated.
Button click
Each time a button is pressed, the handset confirms with a button click. The button click can be switched
on or off.
button, you can deactivate the automatic acceptance facility.
.
function with
and
.
.
and
and
button.
.
- 22 -
and
and confirm with
and
and confirm with
and confirm with
.
and
and confirm with
and
and confirm with
and
confirm with
and confirm with
.
.
button.
.
.
and confirm with
button.
.
.
button.
.
Advertisement
Table of Contents
