Table of Contents
Advertisement
NOTE
• Performing a new channel search will erase and replace
all previously stored channels.
3
MODIFY CHANNEL INFORMATION
(If there is no captured channel, this feature
is not available.)
3-1
Press ENTER button after selecting
"Modify channel information" by
pressing
or
The information of the current channel will
show on the screen.
3-2
Select the channel you want to modify by
pressing CHANNEL - or CHANNEL +
button.
Editing the channel name
1
Press ENTER button after selecting "Name"
by using
or
button.
The keyboard will show on the screen.
2
Select a letter which you want to input by using
, ,
,
button, and press ENTER button
to confirm it.
3
Repeat step 2.
The maximum length of the channel name is up
to 5 characters.
4
The control bars of the last line in the
keyboard is for edit command.
If the inputting of letters is finished, press
ENTER button after selecting "OK".
button.
Using the Setup Menu
Frequency
If the captured signal is bad, you can search the
channel again.
1
Select "Frequency" by using
2
Press
or
button, and it starts to search
channels automatically.
If the broadcasting is found during searching, it
stops to search.
If you want to stop searching, press STOP
button.
Sound system
Set the sound system used for the current channel.
1
Select "Sound system" by using
button, and press ENTER button.
2
Select the sound system by using
button, and press ENTER button.
Skip
If you want to skip a captured channel, select
"Yes".
Fine tune
If the captured signal is not good, you can tune the
channel fine.
1
Select "Fine tune" by using
2
Tune the channel fine by pressing
button.
Each time
or
button is pressed, the
channel frequency decreases or increases by
50KHz.
3-3
Press ENTER button after selecting "OK"
using
button if all the settings are correct.
or
button.
or
or
or
button.
or
Using the Setup Menu
39
Advertisement
Table of Contents
