Connecting To The Internet; Adding A New Gprs/Edge/3G Connection; Turning On Wi-Fi; Connecting To A Wi-Fi Network - AT&T Avail Evolution User Manual

Connecting to the Internet

Your phone's impressive networking capabilities allow you to access the Internet
or your corporate network with ease . You can use default connection settings to
connect to the web via your mobile network (GPRS/EDGE/3G) or Wi-Fi . The GPRS/
EDGE/3G connection can be enabled/disabled manually . From the home screen,
> System settings > Mobile networks and check or uncheck the Data
press
enabled check box .

Adding a New GPRS/EDGE/3G Connection

To get connected via GPRS/EDGE/3G, you need a data plan with your service
provider . If the GPRS/EDGE/3G settings are not pre-configured on your phone,
please contact your provider to get the necessary information .
1 From the home screen, press
Access Point Names .
> New APN .
2 Press
3 Tap each item to enter the information you receive from your service provider .
4 Tap Save to complete .
Tip: To set the APN to default settings, press

Turning on Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 300 feet
(90 meters) .
Open the Notifications panel and tap Wi-Fi .
30
> System settings > Mobile networks >
> Reset to default .
Connecting to the Internet

Connecting to a Wi-Fi Network

1 From the home screen, press
network points, or "hotspots," that your phone has detected are displayed
with their names and security settings .
2 Tap a network to connect to it . If security features are implemented, you'll need
to enter a password and then tap Connect .
3 To disconnect from a network, tap the network name and then tap Forget .

Checking the Wi-Fi Network Status

You can check the Wi-Fi network by looking at the
the network the phone is currently connected to on the Wi-Fi screen . You can then
check the network status from the pop-up window .
Connecting to the Internet
> System settings > Wi-Fi . The Wi-Fi
icon in the status bar . Or, tap
31