Table of Contents
Advertisement
Connecting Component Video
cable
Connect the COMPONENT/PROGRESSIVE SCAN
OUTPUT jacks on the unit to the corresponding
input jacks on the TV using Component video
cable, such as Y with green, Pb with blue, and Pr
with red.
Component
Cable
y You must set the [TV Output Select] option
to [YPbPr] on the setup menu to use this
connection.
y You should still connect the AUDIO cable
between the unit and TV.
Connecting HDMI cable
Connect the HDMI OUTPUT on the unit to the
HDMI IN on compatible TV with HDMI cable.
(Type A, High Speed HDMI™ Cable)
HDMI Cable
COAXIAL
Additional Information for HDMI
y When you connect a HDMI or DVI compatible
device, make sure of the following:
- Try switching off the HDMI/DVI device and this
unit. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on
this unit.
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720x576i(480i), 720x576p(480p), 1280x720p,
1920x1080i or 1920x1080p video input.
Rear of the Unit
- The 1080p, 720p and 576p(480p) resolutions are
the progressive scan applied resolution.
y Not all HDCP-compatible DVI devices will work
with this unit.
- The picture will not be displayed properly with
TV
non-HDCP device.
Resolution Setting
The unit provides several output resolutions for
HDMI OUTPUT and COMPONENT / PROGRESSIVE
SCAN OUTPUT jacks. You can change the resolution
using RESOLUTION button.
y The unit is able to provide a 1080p full HD image
to most 1080p-capable TVs in the market today.
However, there are some 1080p TVs available
from certain companies that are limited in the
types of 1080p images that can be accepted.
Specifically, 1080p-capable TVs that don't accept
images in 60Hz can't display an image from this
unit.
y For 720p, 1080p and 1080i resolution on the
Component / progressive scan output, only non-
copy protected discs can be played back. If the
Rear of the Unit
disc is copy protected, it will be displayed at the
576p(480p) resolution.
y Depending on your TV, some of the resolution
settings may result in the picture disappearing
TV
or an abnormal picture appearing. In this case,
press RESOLUTION repeatedly until the picture
re-appears.
Connecting
11
2
Advertisement
Table of Contents
