Logitech Harmony 600 User Manual page 22

To adjust the Power On Delay, Inter-key Delay or the Input Delay, from the Harmony
Remote Software:
1.
2.
3.
4.
5.
Inter-Device Delay
The Inter-Device Delay is the amount of time between commands for different devices
when you start an Activity. The Inter-Device Delay is also the time between the next
sequence of commands that are sent to other devices within an Activity.
Example: My DVD player doesn't always turn on when I start the Activity. I can get the
DVD player to turn on by using the Help button however I don't want to use Help every
time.
To adjust the Inter-Device Delay:
1.
2.
3.
4.
5.
6.
7.
Repeats
The Repeats are the number of times the remote repeats a command for a device to
properly respond to the command. For instance, many devices need longer or shorter
command repetitions to respond properly.
Example: Any time I press channel up, my Digital Set Top Box skips two channels at a time.
To adjust the Repeats, from the Harmony Remote Software:
1.
2.
3.
4.
22
Devices tab.
Click the
Select the device for which you want to apply the change and click
Select Adjust the delays (speed settings).
Next.
Click
Follow the online instructions.
Help button on your remote for 5 seconds.
Press and hold the
When prompted, confirm that you want to enter advanced delay mode by selecting
Yes.
Select the device you want to adjust the delay for.
Change Delay.
Select
Select Inter Device Delay.
Adjust the inter device delay by selecting "
When you are finished, select
Click Troubleshoot at the top of the Harmony Remote Software window.
Select the device you want to adjust repeats for, and click
Select Device responds to some commands either too many times or only occasionally
and click Next.
Adjust the repeats by selecting a higher or lower number, and click
+" to increase or "-" to decrease.
Done.
Settings.
Next.
SAVE.