Table of Contents
Advertisement
Use the remote control arrow keys and ENTER button to select a
multicast channel.
Press and hold the PGM button to change between "Auto", "Digital" and
"Analog". When set to •AUTO", the station will first be received in Analog
but will change to Digital when a digital signal is detected and the HD icon
will illuminate. If the digital signal becomes unavailable, the unit will revert to
Analog reception.
Program Search
To view the Program Type categories when listening to HD Radio
broadcasting, press the DISP button on the control panel (7) or remote
control (23). Program type categories are listed, allowing listeners to find
similar programming by genre. When a Program Type category is selected,
the radio will start scanning for stations broadcasting in the selected
category. Use the TUNEITRACK
»1
or
1«
buttons; (17) to change the
category.
Preset Stations
You can store up to 18 presets for FM and 6 presets for AM, which can then
be instantly recalled by pressing the associated preset button (8-13). To
store a station, turn the radio on and select the desired band and station.
Press and hold the desired preset button (numbered one through six on the
face of the radio or remote control) for more than two seconds. When
stored, the preset number will appear in the display. The station is now
stored and can be recalled by pressing the corresponding preset button.
Repeat for the remaining five presets on the current band and for presets on
the other four bands.
NOTE: Multicast stations
can be
stored
as
presets, but the unit must
be
In Digital
or
Auto reception mode to receive them.
Preview Scan
Press the +-' button (16) to scan and play all strong stations for 5 seconds
each. Press +-' again to stop scanning and play the current station.
Automatic Store
Press and hold the
+-'
button (16) to select either 18 strong FM stations or
6 AM and store them for quick access using the Automatic Store (AS)
feature. AS only stores stations for the current band. After entering the
stations into memory, the unit will automatically stop at each station for five
seconds, allowing you to preview each selection. When using the AS
feature, the new stations replace any stations already stored in preset
memory.
1..2
NOTE: You
can
stop
the
Automatic Store function
at any
time by
pressing
the
+-' button again.
Advertisement
Table of Contents
