Specification - LightwaveRF JSJS LW300 Operation Manual

3. After 1 second the light will start to become brighter.
4. At the desired brightness release the 'ON' button.
NOTE: If the 'ON' button is not released, the light level
will increase until it stops at the maximum possible
level of brightness.
After setting a dim level using the Handset, if the light
is then switched o , the next time the light is switched
on again the dim level will automatically return to the
previously stipulated setting.

SPECIFICATION

RF frequency: 433.92 MHz
Input rating : 220-230V~ 50Hz
Load : 300W
BS1363
Amber / Blue LED indicator.
Built-in manual ON / OFF function.
Birmingham Science Park Aston
Faraday Wharf
Holt Street
Birmingham
B7 4BB
Tel: 01902 500 562
Email: support@jsjsdesigns.com