Troubleshooting - Baumatic HRCI2570.1 User Manual

Built-in combi fridge/freezer
Table of Contents

Advertisement

When complete, attach screw and slide covers.

Troubleshooting

IMPORTANT: If your fridge freezer appears not to be
operating properly, before contacting the Advice
Line, please refer to the checklist below.
My fridge freezer does not appear to be working/there
is no power to my appliance.
o Check that the plug is fully inserted into the power socket.
o Check that there is power to your mains supply (e.g. that there
hasn't been a power cut or that the fuse hasn't blown).
o Check that the thermostat has not been turned to the off
position.
o Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
My fridge freezer appears to be performing poorly
o Check that the appliance isn't overloaded and that food hasn't
been packed too tightly into it.
o The thermostat setting is too low; you should turn the
thermostat up higher.
o Ensure that the door is closing properly and that the door has
not been opened for a prolonged period in error.
o Ensure that there is adequate ventilation for your appliance.
o Fasten the sled in the inner part of
the panel of the built-in housing
unit at the desired height and at
approximately
outer edge of the door. Tighten
screws as indicated in the diagram.
20
cm
from
the
29

Advertisement

Table of Contents
loading

Table of Contents