Saving Energy When Using Your Fridge-Freezer - Baumatic HRCI2570.1 User Manual

Compressor noise
o There will be an operating noise when the compressor is running.
o After installation, the compressor may be noisier for a short
period of time.
Bubbling and burbling sound
o This noise is emitted as the coolant flows through the pipework
within the fridge freezer.
Water flowing sound
o This is caused by water flowing into the evaporating tray during
the defrosting process and can be heard whilst the fridge is
defrosting.

Saving energy when using your fridge-freezer

There are some simple things you can do to save energy when
installing or using your fridge-freezer:
Installing:
o Install the appliance in a cool position. If it is placed in direct
sunlight or next to an oven or other heat source, the energy
consumption can increase substantially.
o Ensure the appliance is installed with the correct ventilation
requirements. Restricting ventilation can increase the energy
consumption by 15%.
Cleaning and Maintenance:
o Occasionally clean the condenser coils (if present) at the back of
the appliance to maintain a high performance level.
o Clean the door gasket with warm water or a neutral detergent
that leaves no residue. A tight-sealing door gasket is critical to
the efficiency of your appliance.
Usage:
o Do not open the door repeatedly or more frequently than you
have to.
o Do not set the thermostat too low. A change of just one degree
can effect the energy consumption by 5%. Use a thermometer to
check the temperature.
16