Radio Shack 14-1166 Owner's Manual page 7

are available at your local RadioShack
store.
Cautions:
•You must use a (Class 2
!
for AC) power source that
supplies 3V DC and deliv-
ers at least 250 mA. Its center tip
must be set to positive and its plug
must fit the recorder's
Using an adapter that does not meet
these specifications could damage
the recorder or the adapter.
• Always connect the adapter to the
recorder before you connect it to the
power source. When you finish, dis-
connect the adapter from the power
source before you disconnect it from
the recorder.
1. If necessary, set the adapter's volt-
age switch to 3V.
2. Attach the Adaptaplug with its tip set
to positive (+) to the adapter's cord.
3. Insert the adapter's barrel plug into
the recorder's
DC 3V
connects internal batteries.
Preparation
jack.
DC 3V
jack. This dis-
7