Integrated Peripherals - Foxconn G31S Series User's Manual & Installation And Servicing Instructions

Integrated Peripherals

► OnChip IDE Devices
► OnBoard Devices
► SuperIO Devices
► USB Devices Setting
↑↓→←:Move Enter:Select
► OnChip IDE Devices / OnBoard Devices / SuperIO Devices / USB Devices Setting
Press <Enter> to go to relative submenu.
onChip IDe Devices
SATA Controller
SATA Port Speed Settings
↑↓→←:Move Enter:Select
► SATA Controller
[Disabled]:Disabled SATA Controller.
[Dis
[Combined Mode]: PATA and SATA are combined. Max. of 2 IDE drives in each channel.
[Enhanced Mode]: Enable both SATA and PATA.
► SATA Port Speed Settings
When SATA is operating in [Enhanced Mode], you can select its speed to [Disabled], [Force
GEN I] or [Force GEN II]. [Force GEN II] can get the best performance.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter]
Press Enter
[Press Enter]
[Press Enter]
[Press Enter]
+/-/PU/PD:Value F10:Save
F5: Previous Values
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Devices
Enhanced
[ Enabled ]
[Disabled]
+/-/PU/PD:Value F10:Save
F5: Previous Values F7: Optimized Defaults
33
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7: Optimized Defaults
Item Help
Menu Level ►
[Disabled]: Disabled
SATA Controller.
[Combined Mode]: PATA
and SATA are combined
. Max. of 2 IDE drives in
each channel.
[Enhanced Mode]:
Enable both SATA and
PATA.
ESC:Exit F1:General Help